BRAKE PAD (1 PISTON TYPE) BRAKE PAD (1 PISTON TYPE): Exploded View • Torque member • Bushing • Piston boot • Slide pin boot • Slide pin • Piston • Piston seal • Brake caliper body • Bleeder cap • Brake hose • Copper sealing washers • Inner shim cover • Inner shim • Inner pad • Pad retainer • Anti-rattle clip • Outer pad • Outer shim • Outer shim cover • Molykote AS-880N • Niglube Rx-2: Apply brake fluid. BRAKE PAD (1 PISTON TYPE): Removal and Installation REMOVAL WARNING: Clean dust on brake caliper and brake pad with a vacuum dust collector to minimize the hazards of airborne particles or other material. Best Of Cannibal Corpse Pdf Free here.

Jul 10, 2014. But for the life of me the anti-rattle clip installation. Is the spring for the caliper. Mercury Monarch front disc brake swaps on. Find great deals on eBay for gm caliper anti rattle clip. BMW Front Brake Caliper Anti Rattle Spring Clips E46. Disc Brake Anti-Rattle Clip-Front Caliper Clip. Front Disc Brake Anti-Rattle Clip Set - Part Number HW5412 by Dorman. Available in Department at CARiD.com.

CAUTION: • Do not depress the brake pedal while removing the brake pads because the pistons may pop out. • It is not necessary to remove bolts on torque member and brake hose except for disassembly or replacement of brake caliper. For brake pad removal, hang brake caliper with a wire so as not to stretch brake hose. • If brake fluid or grease adheres to the brake caliper or disc brake rotor, quickly wipe it off. • Partially drain brake fluid. Refer to BR-16, 'Drain and Refill'.

• Remove the front wheels and tires using power tool. • Remove sliding pin bolts. • Remove the front brake caliper from the torque member.

Exploded view of the rear caliper components. Clip and both anti-rattle springs. Two pad guide pins. Pads with the shims. Banjo bolt and disconnect the brake hose from the caliper. Plug the hose to prevent fluid loss and contamination. 2 caliper mounting bolts and the caliper from its mounting bracket. To Install: Compress.

Leaving brake hose attached, reposition the brake caliper aside with wire. Photoshop Cs Shortcut Keys Pdf Free Download. • Remove the brake pads, shims, shim covers, pad retainers, and anti-rattle clips from the torque member. CAUTION: • Do not reuse the pad retainers and anti-rattle clips. • Do not damage the piston boot. • Do not drop the brake pads, shims, or the shim covers. • Note the position of components during removal to aid with installation.

• Compress the front caliper piston. INSTALLATION • Install the new pad retainers and anti-rattle clips to the torque member. CAUTION: • Do not reuse the pad retainers and anti-rattle clips. • Do not deform the pad retainers. • Verify that the pad retainers are secured properly to the torque member. • Apply Rubber grease or equivalent to the mating faces between the brake pads and pad retainers. Refer to BR-33, 'BRAKE PAD (1 PISTON TYPE): Exploded View'.

• Apply Molykote AS-880N grease or equivalent to the mating faces between the brake pads, shims and shim covers, and install them to the brake pad. Refer to BR-33, 'BRAKE PAD (1 PISTON TYPE): Exploded View'. CAUTION: When installing new brake pads, replace the shims and shim covers. • Install the brake pads to the torque member. • Using a suitable tool, press the pistons into the brake caliper. CAUTION: Do not damage the piston boot. • Install the brake caliper to the torque member.